Spotcam battery
(suitable for all spot cams in our shop) 3S 12.6V 5000mah
Charger Spotcams general 3S 12.6V 2A with the right charger you can extend the life of your battery. Cheap chargers do not charge batteries according to CC/CV and usually not up to 4.2V or 12.6V. Your battery will never really be full at first, and you will also shorten the lifespan of the battery by up to 30%. Saving on a charger is saving in the wrong place!
Charger power box
Charger for Li-Ion batteries 3S (12.6 volt application) or 4S (16.8V( with 10A charging current in a silver aluminum housing. The charger is equipped with active cooling and is protected against short circuits and reverse polarity. The charger charges with the CCCV (Constant Current , Constant Voltage) charging method. This means that charging is carried out first with a constant current and then with a constant voltage. Towards the end of charging, only small currents flow so that connected balancers or BMS can balance the cells cleanly. All of our chargers are provided Delivery checked for your output voltage and set to the correct final charging voltage for Li-Ion cells. Especially if the battery is operated with a BMS or balancer, the charging voltage must not be above 4.2V per individual cell, otherwise on the one hand there will be clean balancing would not be possible and, on the other hand, the BMS or the balancer would have to work (burn up electricity) all the time.
Baitboat charger
Microprocessor controlled charging/discharging function • Input voltage 11 to 18V DC
For batteries of an outdoor or indoor model
Compact dimensions for easy transport
Integrated fan
Battery types and numbers: Ni-Cd/NI-MH 1-18 cells (Delta Peak) or Li-Ion/Li-Po/LiFe 1-6 cells and lead batteries from 2 to 20V
Adjustable charging current from 0.1 to 10A increments of 100mAh (200W/output)
Adjustable discharge current from 100mA to 5A (100mA steps)
Automatic trickle charging current from 0mAh to 250 mAh
Adjustable voltage at end of discharge (steps of 0.1V)
Protections against incorrect input voltage, faulty connections and reverse connections.
2 integrated balancers are used to care for and protect your lithium batteries (Li-Po, Li-Ion and LiFe) during the charging process with a tolerance of 5mV (when charging or discharging)
Balancer current max. 250 mAh
2 connections for temperature sensor (not included)
XH connections for balancer plugs
Dimensions: 200 x 175 x 73 mm (LxWxH)
Weight: 880g.
Lock Point (Power Box) Cigarette Lighter Plug!
Rubber lips on the plug make the connection to the socket waterproof (note only applies in conjunction with a built-in socket from our shop)
The plug can be secured in the socket by turning it anti - clockwise
W aterproof cable outlet
Strain relief on the plug
1x (+/-) screw contacts each
Dimensions:
Plug for SAE J563 standard: 21 mm diameter